Conveyor belts are products that are required to have a CE marking, due to the European Union legislation. This is something that is required for all types of uses, in order to avoid risks. Therefore, it is necessary to know the testing methods and quality standards that are carried out for the CE marking of conveyor belts.
Especially because this is a competitive and global market with thousands of models of varying quality and composition. Therefore, it is essential to know if you are using a durable, high-performance tool or a faulty piece of equipment that could cost you in the long run. Below, we will clear up all your doubts on the subject.
Main risks of conveyor belts
Due to the many models on the market, CE marking for conveyor belts can be misleading. For example, there is the China Export mark which has a logo similar to the European conformity mark. The same happens with other manufacturers, which can betray public trust and carries the following risks:
- Problems with static electricity discharge running around the belt, endangering all personnel.
- Present constant blockages frequently cause machinery to overheat.
- Low-quality coating can cause small fires and flames around the conveyor belt.
- Son prone to inflammation more frequently than those that comply with the UNE-EN 12882 standard.
Standards that conveyor belts must comply with
Currently, there are multiple tests to determine the CE marking for conveyor belts. These provide information on the actual performance level and the minimum level acceptable by European compliance regulations. Generally, the tests carried out are as follows.
- AbrasionThis refers to the wear and tear that the conveyor belt can suffer during its working cycle. It must be resistant to shocks, impacts, and abrasion from frequent contact with sharp objects.
- HeatHigh temperatures tend to cause conveyor belts to deteriorate, by hardening and cracking them. For that reason, the maximum temperature peaks they can withstand must be measured.
- OilIn order for conveyor belts to obtain CE marking, they need a high level of oil resistance. This is particularly important because oil tends to swell the belt and cause premature wear.
- Extreme coldThese lose elasticity when working at temperatures below 0ºC. At the same time, their abrasion resistance is reduced. Therefore, they must have a cold-resistant design.
- FireA high level of fire resistance is essential for preventing safety issues. These are required for when the tape is both above and below ground.
Compliance with these safety tests guarantees the CE marking for conveyor belts. However, it is also essential to have physical tests on the actual performance of the conveyor belt. This will help you avoid problems and will not put your personal safety or that of your equipment at risk.
If you are looking for a way to obtain CE Marking for Industrial Machinery, trust in Grupo TICE. We are experts in CE Marking and are available to any company that needs it. Contact us now!
